| |
| |
Technical Data
Article #: 991600N
Item no.: 991600N
Control unit
Measurements: approx. 390 x 220 x 121 mm
Weight: approx. 6 kg
1 membrane compressor, digital control with
pressure sensor, alternating pressure, static
mode, care mode, 3 time cycles (5/10/15
min.), automatic lock pad, low pressure alarm,
power loss alarm
Mattress
Measurements
inflated incl.
base mattress: approx. 200 x 90 x 16.5 cm
Weight: approx. 9.5 kg
18 cells, 3 head cells static, non-bending
connecting tubes (incl. transportation safety
lock), CPR emergency ventilation
Materials
Cells: nylon with polyurethane
coating
Cover: bi-elastic cover with polyurethane/
polyester coating,
breathable, slip-retardant
Base: nylon with integrated pocket
for 3.5 cm base mattress
Accessories
transport bag for mattress and control unit
Max. patient weight: 130 kg
Pressure ulcer grade:
I II III IV
|
|
APM 420 plus |
 |
 |
Our APM 420 alternating pressure system is used for the treatment of pressure ulcers up to stage IV (according to EPUAP).
This system has been designed especially for geriatric care appliation. The use of 13 cm cells in combination with a mattress base results in an overall mattress height of only 16.5 cm. Consequently this system is in compliance with statutory minimum distances between bed side rails and mattress surface.
• bi-elastic, breathable PU cover, non-bending connecting tubes, connection coupling with transportation safety lock, external CPR valve
• sensor operated pressure management, between cycles switch off, automatic key lock, alternating pressure, static and care mode, 3 time cycles with 5/10/15 minute selection
• holds up to 130 kg patient weight
|
|
|
